Rubber and plastic insulation materials' advantages

1. Green and environmental protection: It does not release harmful chlorofluoride to the atmosphere and meets the requirements of ISO14000 international-environmental protection's certification. Therefore, it will not produce any harmful pollutants during installation and application.

2. Low thermal conductivity: rubber and plastic insulation is a high-quality energy-saving material, its feature is cold-insulating, heat-insulating, anti-condensation, low heat transfer coefficient and stable, which is isolated from any thermal medium.

 
3. Good fire performance: Rubber and plastic materials meet the standard GB8624 "Building Materials Combustion  Performance  Analysis Method". It is tested as GB8624 B1 grade flame retardant material.

4. Closed-bubble structure: Adopting fine-control micro-foaming technology (ACMF), the bubble closure rate is greatly improved, the thermal conductivity of the product is lower, the cells are more uniform and fine, and the water vapor permeability is strong. Extending the service life. The rubber and plastic is a closed-cell structure. The water in the outside air is difficult to penetrate into the material. It has excellent resistance to water vapor permeation, and it is not necessary to add a vapor barrier layer to the surface of the cold insulation layer. The rubber's wet resistance factor namely μ value is greater than 3500 (ISO9346). It forms a built-in waterproof vapor layer, even if the product is scratched, it does not affect the overall vapor barrier. Rubber is a temperature-protecting layer and a moisture-proof layer.

5. Thin material and space saving: rubber and plastic insulation material's using thickness is reduced by about two-thirds compared with other insulation materials. Therefore, the space above the ceiling of the floor can be saved, and the indoor height can be increased.

6. Long service life: rubber and plastic insulation material has weather resistance, anti-aging, anti-cold, anti-heat, anti-dry, anti-humidity, also anti-UV, ozone, anti-aging, no deformation, etc.

7. The appearance is uniform and beautiful: Rubber and plastic insulation material have high elasticity and smooth surface layer, and the texture is soft. Even if it is installed on irregular parts such as elbows, tees, valves, etc., it can be kept intact and beautiful.

8. Easy and fast installation: Because the material is soft and there is no need for other auxiliary layers, the construction and installation are simple. For the installation of the pipeline, it can be put together with the progress of the pipeline installation. The rubber and plastic pipe can be cut open and then glued with special glue. It can be combined well.