Advice on the laying of non-slip rubber sheets

First, the floor is tested before laying the anti-slip rubber sheet.

Secondly, the floor should be treated before laying. Before the anti-slip rubber sheet is laid, it should be ground and finished with a floor grinding machine to remove the surface stains and trim the uneven areas.

Third, carrying out the self-leveling.

The primer can enhance the tight bond between the base layer and the self-leveling layer and bond the bridge. It should be noted that before the primer is applied, the moisture content test is carried out to ensure that the water content is below 3%. After the primer is applied, it is air-dried and then carry out self-leveling. Pouring the self-leveling slurry to the ground and paying attention to the thickness of the self-leveling. After the completion of construction, the site shall be closed immediately, and it is prohibited to step on and place heavy objects. After 1-2 days, laying the non-slip rubber sheet.

Finally, laying the anti-slip rubber sheet. If the anti-slip rubber sheet is transported to the construction site, in order to restore the memory of the rubber sheet, it should be placed for more than 24 hours. In addition, the self-leveling is polished before the anti-slip rubber sheet is applied, and the self-leveling surface is polished to a large area of floodlight, and a solid surface is exposed. After the non-slip rubber sheet is laid, it can be used after standing for 24 hours.